|
Post by Michael Messer on Mar 26, 2010 23:03:27 GMT
Hi Tark, just to bring you up to date - all MM guitars have been fitted with Stewmac Retro tuners for quite a while now. So upgrading tuners is no longer relevant.
Geoff, I am not trying to be unhelpful, quite the opposite, but nobody can help you now. You have asked almost every question there is to ask to us on the forum and to us at Busker Guitars HQ. You are now at a point where you need to make a decision and buy a guitar.
Good Luck & Shine On Michael.
|
|
|
Post by gouranga on Mar 27, 2010 3:25:10 GMT
Hi Geoff... Please don't take this the wrong way pal. But, are you at the stage in your guitar playing ability where you can really say it is worth spending 1500+ euros? Or, would it be better to buy a less costly reso and work on your ability to play it nicely? Just a thought friend.
Take care and best wishes always.
regards
Gouranga
|
|
|
Post by blueshome on Mar 27, 2010 11:37:41 GMT
It really is down to you now - does either give you the sound and playability YOU want? If it's to be your main instrument then look long term - spending more might be wise, but only on something that meets your requirements. If you don't know what these are at this stage (from your posts you may not) then risk less by spending less, or, wait until you have heard and played more guitars before jumping in for something you may not be satisfied with after a few months.
|
|
|
Post by washboardchris on Mar 27, 2010 13:18:03 GMT
Hi, where in the EU are you?
|
|
|
Post by geoff on Mar 27, 2010 16:51:11 GMT
I'm in Holland.
|
|
|
Post by washboardchris on Mar 27, 2010 19:26:23 GMT
Hi, why not take a trip to palm guitars in Amsterdad (they have a large stock of Resos old and new)& either play through them yourself & find the sound you like or take someone with you who can demo them for you.
|
|
|
Post by geoff on Mar 30, 2010 18:42:54 GMT
Please if i may, I've got just one extra question:
>> Heavy gauge steel NRP versus Light gauge steel NRP:
Could some of you tell me if heavy steel NRPs are regarded less in any way, compared to the modern lighter gauge?
|
|
|
Post by geoff on Mar 30, 2010 19:18:12 GMT
Thanks a lot Chris,
If I had been in the neighbourhood of amsterdam I certainly would have tried it some more. When I tested Steven Finn's heavy gauge steel Delphi, I found it very heavy and dry sounding. He got it real cheap but I start to think the fat steel contributed to the low price.
However, I have to decide fast, if I want this modern Vintage Steel NRP Tricone. If not, it will go somewhere else. But is is the heavy gauge steel plate. I'm leaning towards a halt to the deal and wait for a light gauge steel. Since the timing is so crucial, I ask you all this...
|
|
|
Post by geoff on Mar 30, 2010 19:25:36 GMT
Yes, it is the newest Vintage Steel with arched back and hot cones, but the steel is heavy. A well known player called Snakehips told me the heavy steel is outdated. Could it be the Vintage Steel finish is not available in lighter gauge? I just need to do the right thing...
|
|
|
Post by geoff on Mar 30, 2010 19:35:56 GMT
Can you help me a bit: I am looking at the media section sound samples. It drives me nuts! I can't find what I need, however stupid that sounds. Please tell me exactly which clips to compare...
|
|
|
Post by geoff on Mar 30, 2010 19:40:19 GMT
I can only find a used one in the shops for 1900 euro. If you know cheaper ones let me know.
|
|
|
Post by geoff on Mar 30, 2010 19:57:08 GMT
I have tried to compare clips like you told me, but heavy gauge against lighter gauge steel can't be compared. There only a very tiny light gauge example of 6 seconds. That's all. What would you call a resonable price then?
|
|
|
Post by fitchmeister on Mar 31, 2010 10:05:06 GMT
Hello Geoff
I have recently tried an NRP light gauge steel guitar - Triolian against a heavier gauge guitar - Delphi Deluxe. I bought the Triolian - i didn't plan to, it just happened that way.
I would say the lighter gauge instrument is loud and very responsive but excess noise is harder to control in much the same way a racing car would be harder to drive around town. I really struggle to play it with finger picks where a Delphi is no problem at all. As a guide it is loud enough played without picks to be heard against a vintage national being played with picks.
I have a Tricone also and that is sweeter sounding without the punch of the single cone
At the moment i am finding the triolian rewarding to play as my technique adapts to it
Asking what sounds better is a bit asking me what my favourite colour is ;D
Good luck in your search
Roj
|
|
|
Post by geoff on Mar 31, 2010 19:23:16 GMT
That is an interesting fact, Fitch. Seems the thinner gauge is more sensitive to playing than the thicker gauge. I would like a reso that sometimes can be played without picks too. Looks like I need a thinner gauge.
|
|
|
Post by geoff on Apr 2, 2010 21:25:03 GMT
Silly me, I did not check here today, just now that I bought exactly the same thing.
The one you show me is at 1000 pound, but it will probably go up in the last minute of the auction.
Well, on the bright side, mine has minor blems but will have the hot rod cones. (introduced in 2007) And some warranty.
Chris W, you are a good guy, keeping an eye on the Fleabay for me. Thanks!
The die is cast. No more going back. No more sleepless nights. No more pointless whining on the forum. I just have to sit and wait and see what I'll get.
For now, thank you all for not banning me and for the tremendous support and effort to break through my thick ways. Happy Easter weekend.
Love,
Geoff
|
|