Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 18, 2007 21:33:05 GMT
Hello,
This could be just me, but does anyone else get a bit more finger noise from Newtone National strings when they first put them on?. Or do I have to accept the ideas that my fingers are getting noisier.
Regards Jimmy
|
|
|
Post by robn on Jan 18, 2007 21:46:33 GMT
Hi Jimmy,
All acoustic guitar strings need a period of "playing in". Most are a little noisy, metalic and jangly until they settle down. They then go through a "sweet" period before going dull. Newtones need playing in like any other string - their advantage rests in both their great tone and the length of time they stay sweet. ;D
Robn
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 18, 2007 22:09:32 GMT
Thanks Robn. I realise all strings need playing in, however in comparison to d'adario and other manufactured brands they seem to need alot more playing in. I do agree though I hardly have to change them. Maybe I just need to play more.
|
|
|
Post by robn on Jan 18, 2007 23:02:11 GMT
I think that you might be right. D'Addarios play in pretty quickly - but they sound pants on my reso (They are OK on my travel guitar though) I do think about when to change my Newtones so they have a chance to play in before going out to an open mic etc Mind you, the DRs I have tried take even longer to settle Robn
|
|
|
Post by rickS on Jan 19, 2007 9:28:18 GMT
Hey Jim, I've found that using Fast Fret slickens up the strings & reduces finger-noise..
|
|
|
Post by roger on Jan 19, 2007 15:00:38 GMT
I fitted a set of Newtones a fortnight ago to my acoustic that I use for slide and finger style. Slide they are great they really sing but when I play fingerstyle the nickel wound third sounds like I am strangling a mouse. I play for about an hour a day on average and I think it is starting to settle down but it is annoying. Not sure that I will invest in anymore apart from on my Reso. Regards Roger
|
|
|
Post by robn on Jan 19, 2007 21:27:59 GMT
Hi RickS, I'd completely forgot that I had some Fast Fret in the back of my strings draw until I saw your post. I tried it out on the Newtones on my reso for the first time this evening and my glass slide nearly shot across the room You are right about it reducing finger noise and it reduces slide noise as well - if you can hang on to it It felt like I was playing ground wound strings (like D'Addario Flat Tops) but with the Newtone sound. I think I'll keep using it for a few days to see how I get on. Robn
|
|
|
Post by Michael Messer on Jan 19, 2007 23:57:26 GMT
I have used Newtone strings on all my guitars since 1991 and I have never noticed a noise problem. I have never used Fast Fret or any other brand of string lubricant. I put strings on my guitars and play them until they go dull and then I change them. This is not meant to be a sarcastic answer, I really have never had any problems with string noise from Newtones or any other brands. I do prefer strings that are not brand new, but playing them in only takes a couple of songs. I think the problem is that factory produced strings are wound at such a high speed that the heat removes some of the brightness and the life of the string.
Shine On, Michael.
|
|
|
Post by rickS on Jan 20, 2007 10:00:13 GMT
Hi all, just to clarify - the Fast Fret's main purpose for me is keeping the strings clean & preserving their longevity; the reduced finger-noise is a fringe benefit, it's primary function is that with regular use, I find that a set of strings will last 4 - 5 times longer before going dead - which, apart from the obvious economic advantage, means not having to play in new strings to get them to that sweet spot! A product that actually does what it claims..
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 20, 2007 10:00:49 GMT
I hope I didn't sound like I was bashing Newtone. I use them alot and like them.
They do last me a very long time.
Regards Jimmy
|
|
|
Post by Michael Messer on Jan 20, 2007 10:21:31 GMT
Thanks Jimmy & Rick. Not a problem! The whole purpose of this forum is to discuss and share knowledge, so we have to speak openly about about products, tools and techniques. Otherwise we will fall into the trap of many other discussion forums and just talk Bull***t. :-)
Shine On, Michael
|
|