|
Post by mikevernon on Apr 23, 2008 15:12:52 GMT
Does anybody know where I can buy a replacement button for a machinehead tuner, if that's the correct term for the thing that you turn to tighten the string. It's off my Framus 12-string which must be around 50 years old by now, but it looks like a fairly standard item. It's round, 15mm in diameter, and slightly convex on both sides. The colour is pearly white but a plain white one would be fine, as would a slightly larger one. I'm not sure if the fitting to the spindle is standardised. The spindles on this guitar look like around 2mm diameter at a guess, with a single flat to provide tthe drive. Any help would be much appreciated.
|
|
|
Post by robn on Apr 23, 2008 15:39:01 GMT
|
|
|
Post by growler on Apr 23, 2008 16:09:59 GMT
|
|
|
Post by mikevernon on Apr 24, 2008 23:13:45 GMT
Many thanks to both Robin and Growler. I've been in touch with both companies and although I can't find an exact match I should be able to find something to do the job. Mike
|
|