|
|
Post by pete1951 on Mar 3, 2023 10:48:37 GMT
This cheap 60s acoustic has had a lot of stuff done to it, ( re-profile the neck, truss rod, new finger board and frets , floating pickup. I have a slightly unusual way that I am going to fit a volume pot, where would you put it?  Pete |
|
|
|
Post by Pickers Ditch on Mar 3, 2023 11:07:33 GMT
Slim line sideways one inside the "f" hole?
|
|
|
|
Post by bonzo on Mar 3, 2023 11:09:20 GMT
Could look cool on the scratch plate if it's solid enough. 😎😎
|
|
|
|
Post by resotonic on Mar 3, 2023 20:24:03 GMT
Is the pickup surface mounted - no hole underneath?
|
|
|
|
Post by pete1951 on Mar 3, 2023 21:43:43 GMT
Is the pickup surface mounted - no hole underneath? The pickup is an old Kent Armstrong ,and screws on the end of the finger board. Pete |
|
|
|
Post by pete1951 on Mar 3, 2023 21:59:04 GMT
PD came close. It’s mounted ( with a couple of washers) in the F hole. The white mark gets wider as you increase volume.  |
|
