Cigar tube needed

[pete1951]

I have found a pickup for a cigar box guitar that is under construction. What I thought would look good is to put it in an old aluminium cigar tube (cut down to about 50mm long) They tend to be sold in batches of 10, or with the box, which I don’t need so was wondering if anyone out there had a spare. It should end up looking like a ‘lipstick’ pickup, similar to a Danelectro.


The bigger the better, but anything over about 20mm in diameter would be fine
Thank (in advance)
Pete

[bod]

I’ve a bagful somewhere - I’ll have a dig, see if I can find them...

[pete1951]

Brilliant!

[leedscitystompers]

I’ve got some spare if you’re struggling. 🎯

[pete1951]

Thank for the offer, ‘bod’ is looking for some, if he can’t find them I may get back to you,
Pete

[bod]

Hi Pete, I found ‘em, but they’re a little under 20mm diameter, so maybe no use to you... if you still want a couple you’re very welcome, but if you need over 20mm maybe leedscitystompers can help

[pete1951]

Thanks for looking, they might do, will be in contact with LC Stompers to see if he has a pair of larger ones.
Pete

[pete1951]

Thanks for looking, they might do, will be in contact with LC Stompers to see if he has a pair of larger ones.
Pete

[pete1951]

Hi to LCStompers, if your tubes are 20mm or more in diameter I would love couple
Pete
I have PMed you but there seems to a glitch at the moment, so it may no have gone through. Let me know about postage costs etc.

[pete1951]

Hi to LCStompers, if your tubes are 20mm or more in diameter I would love couple
Pete
I have PMed you but there seems to a glitch at the moment, so it may no have gone through. Let me know about postage costs etc.

[leedscitystompers]

Replied. 👌🏻