|
Post by alexkirtley on May 13, 2022 12:34:04 GMT
Hi all
I’m having a play around with a solidbody resolectric type guitar, I’m just needing to rout the well, does anyone know the width and depth of the well for a single cone national type resonator?
Cheers
|
|
|
Post by pete1951 on May 13, 2022 15:02:46 GMT
This depends on where your bridge ends up, which is ( on most resos) dependant on the hightof the handrest on the cover plate .
Most end up about an inch deep, but if your cover plate is very domed or very flat you could end up with a high or low saddle . Pete
|
|
|
Post by pete1951 on May 14, 2022 7:04:34 GMT
A 9 1/2” cone is 9 1/2” wide, so the well can be 9 3/4 or 9 7/8” to give a little space for the cone to be adjusted. Pete
|
|