|
Post by ken1953clark on Mar 3, 2018 14:13:16 GMT
As I hurtle towards retirement there are things cluttering up my flat reminding me that they need to go, so spring clean time! C-Slide II My home-made 21” scale lap steel. The body is a solid lump of beech with my ‘shark’ design 4 + 2 headstock. The pickup is a 4-wire humbucker and has been setup with a 5-way switch which gives: Humbucker, both poles in series, both poles in series out-of-phase, single coil, single coil with tone cut. Finally the pièce de resistance is useless is the Duesenberg Multibender with 2 palm pedals that will give you the chord, the relative 4th, sus-2 and sus-4 chords at any position. C-Slide IITailHeadIt’s set up for open-E. The levers can be rearranged to whatever you want, but it’s fiddly, not the sort of thing you want to do between numbers! :-) My house is for sale so I don’t have access to my cellar anymore to finish It off. The body needs fettling and finishing. I normally use Danish oil but you pays yer money... It comes with an unused stick on fretboard marker and gig bag. Its in Leeds, will post at your expense. £200 Cheers
|
|
|
Post by armando on Aug 6, 2018 8:58:15 GMT
Bit late I know, but if you still have this C-Slide for sale I'm very interested.
Ian
|
|
|
Post by ken1953clark on Aug 7, 2018 17:14:29 GMT
Sorry it went early doors
|
|